Modern and Promising Technology for the use of Plasticizers for Cast Asphalt Concrete Mixtures
Abstract: In this article the necessity and expediency of application polymeric and bituminous PB (PBP) for road construction is proved; practical recommendations about selection and correction of structure of PBV under production conditions which consists in the corresponding introduction of polymer to hot bitumen, a refinement of mix in a mill of high power and its final dissolution are provided; data on influence of brand of initial bitumen, like its structure, quality and amount of polymer and softener, the modes of preparation and storage on PBV properties contain; as the modifier added in a bitumen process of manufacture polymer like styrene-butadiene-styrene (SBS) was considered that results in the considerable advantages in properties knitting both at high, and at low temperatures, in a corollary of what use of the modified bitumen is much more efficient, than use of road asphalt.
Keywords: asphalt concrete, polymeric and bituminous knitting, styrene-butadiene-styrene, block copolymer, softeners.
Pages: 21-23.
For citation: Zagorodnyaya, A. V. Modern and Promising Technology for the use of Plasticizers for Cast Asphalt Concrete Mixtures. – Text : electronic. – In: Proceeding of the Donbas National Academy of Civil Engineering and Architecture. – 2017. – Issue 2017-4(126) Scientific and technical achievements of students of the construction and architectural industry. – Р. 21-23. – URL: https://donnasa.ru/publish_house/journals/vestnik/2017/2017-4(126)/st_05_zagorodnyaya.pdf (date of access: 19.11.2024). – ISSN 2519-2817.
Issue 2017-4 (126)
Journal: Proceeding of the Donbas National Academy of Civil Engineering and Architecture
Publish house: Donbas National Academy of Civil Engineering and Architecture
Journal: Proceeding of the Donbas National Academy of Civil Engineering and Architecture
Publish house: Donbas National Academy of Civil Engineering and Architecture